The following requires that CONNECT GO is ready to be used in your organisation. Click here for more info.
 

It is possible to use CONNECT GO in your Zoom room. The below guide shows the steps involved to set this up on your video endpoint.

After completion; the endpoint's display will look similar to the image below:

1. As a Zoom admin, login to the Zoom portal, expand Room Management and then click on Zoom Rooms.
2.  Click Edit on the room in which you want to add the GO button. Under Setup; scroll down until you see Customize home screen, make sure this is enabled.
3. Click Add contact to home screen. 
   1. Go to the H.323/SIP tab.
   2. Select SIP as protocol with the radio button
   3. Enter go.{tenant_id}@joingw.com as the address in the first text box
      • If the Zoom Room is a dual screen room the address to be used is go1.{tenant_id}@joingw.com
   4. The name is what will appear under the button on the homescreen. Make sure this is clear to your users and short enough to appear well on the home screen
4. Click Save.