Requirements

The following Network and API configuration is required in for Synergy ANALAYZE.

VMware 5.5 or newer

DNS A-record (optional)

As well as the two above requirements, Synergy ANALYZE requires the following configuration

Network Access for infrastructure components

Source Destination Protocol/Port TCP/UDP Additional Information
ANY ANALYZE HTTP/80 TCP Web UI
Client Network ANALYZE SSH/22 TCP Administration
ANALYZE

Pexip manager API

HTTP(S)/80,443 TCP CDR Receiver configuration
All pexip nodes ANALYZE Syslog/8787 TCP CDR's
ANALYZE CMS API HTTP/80 TCP CDR Receiver configuration
CMS callbridges ANALYZE HTTP(S)/8585 TCP CDR's
ANALYZE Cisco VCS API HTTP(S)/80,443 TCP CDR Harvest
ANALYZE DNS server DNS TCP & UDP  
ANALYZE 92.220.31.18/28 SSH/2222 TCP Remote Support (Optional)
ANALYZE 92.220.31.18/28 HTTP(S)/80,443 TCP

License Validation: Proxy is supported

ANALYZE 84.22.108.36/32 HTTP(S)/80,443 TCP Software upgrades

 

API Access Requirements

Component Minimum Access Level Notes
Pexip API Administrator Used for configuring syslog servers
Cisco VCS Read only, API access Used for harvesting CDRs
CMS API role Used for configuring CDR receivers

Minimum irtual Server Requirements

CPU RAM HDD
6 Cores 16 GB 500 GB